Yes, I believe you are correct that my chipset is not compatible with Win10. Obviously obtaining a new adapter would remedy the issue. However, late at night or if you do not want to be bothered with obtaining a new adapter for something you very infrequently use, downloading the 3.3.3.114 driver dated 2009, installing the driver and rolling the driver back to this 2009 driver for the comm port your connecting the outdated adapter to, does allow you to finish your work without delay.
Chances are the chipset in your converter is not compatible with Windows 10. You need a Prolific 2303HX Rev.D chipset. Auto download of the driver is available but without the chipset it won't work. Good Luck!
Jul 05, 2011 July 5, 201112 commentsInstalling, PL2303-DB9, Windowsamazon:asin=B00425S1H8, pl2303-db9, widget=pl2303-db9. Windows 7 will detect and pop up a wizard to install drivers when our Plugable USB to Serial adapter is plugged in, but itβs also easy (as essential on other operating systems) to install the driver software first. Pkzip 64 bits download.
What I was doing with the Serial/USB adapter was programming a new Motorola two way radio so it could be used in our network. This is a task is something done very infrequently. Finding a way to use my existing serial/USB adapter allowed me to accomplish what I needed to do without waiting to find an adapter supported by Win10.
Hope this helps others that may also be in a bind. I have since, at my leisure, purchased a new Serial/USB adapter supported by Win10 so I can use the programming cable necessary to program any new radios we obtain in the future.
The PL2303TA is a USB to Serial Bridge Controller from Prolific. The chipset provides USB to straight-through RS232 serial connectivity at baud rates up to 128Kbps. This allows you to use a USB port in your computer to a RS232 type devices such as point-of-sale terminals, serial modems as well as industrial equipment.
PL2303TA USB to RS232 DB9 Serial Driver
The driver for the USB to RS232 DB9 Serial Adapter can be downloaded below. There are also other serial type cables available for other serial devices. These included but not limited to USB-C to Printer Bridge Controller driver, USB to Serial Driver as well as the USB to RS232 Bridge Controller. There is also the USB to RJ45 Driver Below you will find the specs or specifications of the USB to RS232 DB9 Serial Driver.
Note the driver for the adapter is found below.
This will open to the installation pages.
![]() USB to Serial Driver (Windows)FT232r USB UART Driver (Linux)
VN:F [1.9.22_1171]
VN:F [1.9.22_1171]
PL2303TA USB to RS232 DB9 Serial Driver, 10.0 out of 10 based on 1 rating
Related PostsC2g Usb To Db9 Driver
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |